[Solved] KVM virsh command hang

[DewlanceCTO]

Sometimes KVM virsh command hang but it can be solved by just restarting a libvirtd.

Run this command:
service libvirtd restart

Note: If RAID array is rebuilding or server load is high then it can take few minute.

Now you can run your virsh command but first time it will take few minute so you need to wait for few minute and once it start working then it will not hang.

You can buy SSD KVM VPS from http://dewlance.com/cheap-xenpv-vps (KVM VPS, not xen)